Many homeowners encounter the task of replacing garage door springs, and while it can be done on your own, it’s not without risks. These springs are essential for lifting and lowering the heavy garage door, and they operate under high tension, making proper handling crucial. This guide will take you through the process, explain the types of springs, and offer safety tips so you can decide whether to tackle this project yourself or call a professional.
Garage doors typically use either extension springs, which stretch along the sides, or torsion springs, which are mounted above the door. Understanding which type you have is the first step in the replacement process. Each type has its own specific method of removal and installation, and this guide covers both, ensuring you have the right information for your garage door system.
If you decide to proceed with replacing the springs, this guide provides a detailed step-by-step approach, including the necessary tools and safety precautions. However, it’s important to recognize the potential dangers involved, especially with torsion springs, and to consider professional help if you’re unsure about any part of the process. Keep reading to ensure you handle this repair safely and effectively.
Understanding Garage Door Springs
Garage door springs are powerful mechanical devices that counterbalance the door’s weight, making it easier to lift manually or with an opener. Without these springs, your garage door would be extremely heavy and difficult to operate. There are two main types of springs: extension and torsion springs, each with its characteristics and replacement procedures.
Types of Garage Door Springs
Knowing the type of spring your garage door uses is the first step in the replacement process.
- Extension Springs: These springs are typically mounted on either side of the garage door and stretch as the door closes. Extension springs are commonly found in residential garage doors due to their simpler design and lower cost. They extend and contract, using the tension to lift and lower the door.
- Torsion Springs: Located above the garage door opening, torsion springs work by twisting on a horizontal bar as the door is lifted or lowered. Torsion springs are generally more durable and provide smoother operation than extension springs, making them a popular choice for larger or heavier doors. They also offer better balance and safety features, which is why they are preferred for most modern installations.
How Garage Door Springs Work
Understanding the mechanics behind garage door springs can help you appreciate their importance and the need for careful handling.
- Extension Springs: These springs store energy by extending when the door is lowered. When you lift the door, the springs contract, releasing the stored energy to help raise the door. They usually work in pairs, ensuring that the door lifts evenly. Extension springs are equipped with safety cables that prevent them from causing injury if they break.
- Torsion Springs: Torsion springs work by twisting on a metal shaft above the door. As the door closes, the springs twist and build up tension. When the door opens, the springs unwind, releasing the tension and assisting in lifting the door. Torsion springs are designed to handle more weight and last longer than extension springs, but they also require more precision during installation and adjustment.
Symptoms of Failing Springs
Recognizing the signs of a failing garage door spring can help you address the problem before it becomes a major safety hazard.
- Difficulty Opening the Door: If your garage door suddenly feels heavier or the opener struggles to lift it, this could indicate a failing spring.
- Loud Bang: A loud noise, like a gunshot, coming from the garage is often the sound of a spring breaking. This is a clear sign that the spring needs to be replaced immediately.
- Visible Gap in the Spring: For torsion springs, if you notice a gap in the coil, it means the spring has snapped and is no longer functioning.
- Uneven Door Movement: If the door moves unevenly or jerks as it opens or closes, it could be because one of the springs is losing tension or breaking.
- Door Doesn’t Stay Open: If your garage door doesn’t stay in the open position or starts to drift down on its own, the springs may lose their tension and need to be replaced.
Safety Considerations
Replacing garage door springs can be dangerous due to the high tension they are under. Here are some safety tips to keep in mind:
- Wear Safety Gear: Always wear safety glasses and gloves to protect yourself from potential injuries.
- Use Proper Tools: Ensure you have the correct tools, such as winding bars for torsion springs, to perform the replacement safely.
- Disconnect the Opener: Always unplug the garage door opener before starting any work to prevent accidental activation.
- Work with a Partner: Having someone assist you can increase safety, especially when handling heavy or awkward components.
- Check the Cables: Inspect the safety cables on the extension springs. These cables are designed to contain the spring if it breaks, preventing it from flying across the garage and causing injury.
When to Call a Professional
While DIY enthusiasts can handle many garage door repairs, spring replacement is often best left to professionals, especially in the case of torsion springs. Here’s when you should consider calling in an expert:
- Lack of Experience: If you’re not familiar with garage door mechanisms, it’s safer to have a professional handle the job.
- Torsion Springs: These springs require specific tools and knowledge for safe replacement. The tension in these springs can cause serious injury if not handled properly.
- Multiple Springs: If your garage door has more than one spring and one has broken, it’s advisable to replace all of them at the same time, which can be a complex task.
- Heavy Doors: If your garage door is particularly large or heavy, professional assistance is recommended to install the springs correctly and safely.
What You’ll Need
Before starting the replacement process, make sure you have all the necessary tools and materials.
Equipment / Tools
- Safety Glasses: Protect your eyes from flying debris.
- Gloves: Heavy-duty gloves to protect your hands.
- Winding Bars: Required for safely winding and unwinding torsion springs.
- C-Clamps: To secure the garage door during the replacement.
- Wrenches and Sockets: For loosening and tightening bolts.
- Tape Measure: To measure the springs and ensure the correct replacement size.
- Step Ladder: To reach the springs safely.
Materials
- Replacement Springs: Ensure they match the size and type of your current springs.
- Lubricant: To keep the new springs operating smoothly.
- Safety Cables: If you’re replacing extension springs, check the condition of the safety cables and replace them if necessary.
Instructions
Replacing garage door springs involves several steps. Here’s a general overview:
- Secure the Door: Use C-clamps to hold the door in place on the track to prevent it from moving during the replacement process.
- Disconnect the Opener: Unplug the garage door opener to avoid any accidental operation.
- Release Tension: For torsion springs, carefully use winding bars to release the tension before removing the springs. For extension springs, disconnect the safety cables and the springs themselves.
- Remove Old Springs: Detach the old springs from the brackets and pulleys or the torsion bar.
- Install New Springs: Attach the new springs, ensuring they are securely fastened to the brackets and pulleys or wound properly onto the torsion bar.
- Re-tension the Springs: Use winding bars to wind the new springs carefully to the required tension for torsion springs. Extension springs should be connected to the pulleys and safety cables.
- Test the Door: Slowly lift the door manually to ensure it operates smoothly. Make any necessary adjustments to the tension or alignment.
- Reconnect the Opener: Once satisfied with the door’s operation, reconnect the opener and test it with the remote.
How to Replace Extension Garage Door Springs
Replacing extension springs is generally easier and less risky than replacing torsion springs. Here’s a step-by-step guide:
- Release Tension: Open the garage door fully and secure it with C-clamps or locking pliers. This releases the tension on the springs.
- Remove Safety Cables: Carefully remove the safety cables that run through the springs.
- Detach Old Springs: Disconnect the old springs from the track bracket and the pulley.
- Install New Springs: Attach the new springs to the track bracket and the pulley, ensuring they are correctly aligned.
- Reattach Safety Cables: Thread the safety cables through the new springs and secure them in place.
- Test the Door: Remove the clamps and lower the door slowly to ensure it operates smoothly.
How to Replace Torsion Garage Door Springs
Replacing torsion springs is more complex and requires specific tools and knowledge. Here’s a general outline:
- Secure the Door: Close the garage door and secure it in place with C-clamps or locking pliers.
- Release Tension: Use winding bars to unwind the old springs, releasing the tension carefully.
- Remove Old Springs: Loosen the set screws on the torsion bar and slide the old springs off the bar.
- Install New Springs: Slide the new springs onto the torsion bar, ensuring they are positioned correctly for winding.
- Re-tension the Springs: Using winding bars, carefully wind the new springs to the correct tension, following the manufacturer’s instructions.
- Test the Door: Slowly lift the door to ensure it operates correctly. Make adjustments as necessary.
- Reconnect the Opener: After ensuring the door works properly, reconnect the opener and test it.
Frequently Asked Questions (FAQs)
Can I replace the garage door spring myself?
While it’s technically possible to replace a garage door spring yourself, it’s not recommended unless you have experience with garage door systems. Springs are under high tension, and improper handling can lead to serious injury. It’s usually best to hire a professional to ensure the job is done safely and correctly.
Is it safe to replace garage door springs?
Replacing garage door springs is not considered safe for the average DIYer due to the high tension in the springs, which can cause serious injury if they snap. Professional technicians have the tools and expertise to handle the job safely, minimizing the risk of accidents during the replacement process.
Can you replace a garage door without changing springs?
Yes, you can replace a garage door without changing the springs, but it’s important to assess their condition. If the springs are old or showing signs of wear, it’s wise to replace them at the same time to ensure the new door functions smoothly and safely. Old springs might not properly support the new door’s weight.
How do I know what size garage door spring I need?
To determine the correct size of a garage door spring, you’ll need to measure the spring’s length, wire diameter, and the inside diameter of the coil. Additionally, count the number of coils in 10 inches to determine the spring’s wind. Accurate measurements are crucial, so if in doubt, consult a professional to ensure you get the right size.
Can you DIY a garage door spring?
DIY garage door spring replacement is possible but highly discouraged unless you have the proper tools and experience. The high tension in the springs can be hazardous, potentially leading to severe injuries or damage if mishandled. For safety reasons, it’s best to hire a professional to handle the replacement.
Conclusion
Replacing garage door springs is a challenging task that requires careful attention to detail and strict adherence to safety procedures. While extension springs can be replaced with basic tools and some mechanical know-how, torsion springs pose a greater risk and are often best left to professionals. Regular maintenance and timely replacement of springs can keep your garage door functioning smoothly and safely for years. If you’re ever in doubt about the process, it’s always wise to consult a professional to avoid injury and ensure the job is done right.
End Note
Thank you for journeying with us through the complexities of replacing garage door springs! At Lopez Garage Door, we understand that tackling a project like this can be daunting, which is why we’re here to offer our expertise every step of the way. Whether you’re considering a DIY approach or deciding it’s time to call in the pros, we’ve got you covered.
From reliable chain drive and belt drive openers to our comprehensive gallery of past projects, we provide the highest quality services in Katy, TX, and beyond. Don’t miss out on our current specials to get the best deals on garage doors and professional installation.
For more expert advice and tips, visit our blog, and if you’re ready to upgrade or need a repair, don’t hesitate to contact us. At Lopez Garage Door, we’re committed to ensuring your garage door operates smoothly and safely, giving you peace of mind every time you open or close it. Let’s get your garage door back in perfect working order today!
